Welcome

Twinmaster 16 III - servo-driven double-bender 2019126

 Description
The Twinmaster 16 III is a new automatic processing centre with 2 bending heads designed for maximum performance and high throughput. It processes wire diameters from 8 to 16 mm. It is equipped with modern servo drives. The Twinmaster 16 III is therefore energy-saving and quiet with low maintenance costs. The wire feed system and the bending units are new and extremely compact. For double bending the 1st bend is carried out on the 2nd bending head and is followed by positioning and cutting. The 1st bending head then takes over and bends the end of the bar. The new bending tools supply a flat surface and guarantee fast tool-changing.
  • Machine info:

    Twinmaster 16 III - servo driven stirrup machine with double bender integrated. Comes with 12 meter bench, and is capable of making 6m length with bend in each end. Machine comes with 6 payoffs and is from 2013.

    Machine is first available from Q1 2020.

  • Steel grade700 N/mm²
    Wire diameterSingle strand: Ø 8-16 mm and double strand: Ø 8-12 mm
    Rate of feed, max.120 m/min
    Bending speed, max.1500°/sec
    Bending angle0-180°
    Gross weight:
    Machine
    Double bending unit
    8.000 kg 2.000 kg
    Dimensions (L x W x H)12.000/15.000/18.000 x 1.700 x 2.300/3.540 mm
    Operating voltage3 x 400 V / 50 Hz
    Connected load75 kW
    Average power consumption5-8 kW
    Main fuse100 Amp
    Air pressure/consumptionMax. 8 bar / approx. 200 l/min
    Drawing power of feeding rollers15.000 - 35.000 N
    TolerancesSide lengths +/- 1 mm/m
    Angles +/- 1°
    Bars +/- 1 mm/m
EVG
Filzmoser
GMT
Hambi
KOCH
KRB
MEP
OSCAM
PEDAX
Peddinghaus
SCHLATTER
SCHNELL
SIGMA
TECNO IMPIANTI
VITARI
WAFIOS