Brand: | PEDAX |
Machine Type: | Manual/Single bender |
Single Wire Size: | 50 |
Used PEDAX Perfekt 60CB which has been upgraded to 60CC. Fully refurbished.
Technical details:
| Perfekt 60 CC | |||||||
Numbers of bars |
|
| 1 | 2 | 3 | 5 | 8 | |
Single bend | 450 N/mm² |
| 60 | 40 | 38 | 35 | 20 | |
650 N/mm² |
| 50 | 32 | 35 | 28 | 18 | ||
850 N/mm² |
| 45 | 35 | 28 | 25 | 16 | ||
Double bend* | 450 N/mm² |
| 40 | 38 | 28 | 18 | 14 | |
650 N/mm² |
| 35 | 28 | 25 | 16 | 14 | ||
850 N/mm² |
| 32 | 25 | 18 | 14 | 14 | ||
|
|
|
|
|
|
|
| |
Bending height - Stand. equipment | approx. mm |
| 450 | |||||
Bending height- with banjo** | approx. mm |
| 800 | |||||
Voltage | V/Hz |
| 400/50 | |||||
Connected load | kW |
| 4 | |||||
Turntable RPM | min. -1 |
| 5/7/10/14 | |||||
Net weight | approx. kg |
| 1325 | |||||
Gross weight | approx. kg |
| 1325 | |||||
Case dimensions | (LxWxH) cm |
| 195x125x110 | |||||
SIGMA MECHANICAL REBARBENDER (with 4 Pin hole rails): MODEL: DBM 42 – 4P, used, without CE mark
SIGMA MECHANICAL REBARBENDER (with 4 Pin hole rails): MODEL: DBM 42 – 4P, NEW, with CE mark
SIGMA MECHANICAL REBARBENDER (with 4 Pin hole rails): MODEL: DBM 42 – 4P, NEW, with CE mark
SIGMA MECHANICAL REBARBENDER (with 4 Pin hole rails): MODEL: DBM 42 – 4P, NEW, with CE mark
Used Peddinghaus Special 42S
Used Oscam radius machine
Used Oscam radius machine
Used PEDAX Perfekt 42CA which has been upgraded to 42CC. Fully refurbished.
Fully working RS 300 shear from Pedax/Peddinghaus. It can be integrated to any pedax shear line. Ask...
