MEP LTM 300 2026022

 Description
The LTM is a plant for the rebar cutting, designed for heavy duty work, easy to operate and to maintain. It is equipped with high capacity hydraulic guillotine shears available in different configurations. These features are particularly appropriate for production in high volume and big cutting series consisting of large amount of identical bars (same diameter and size).,## The CS shaping plant is an automatic solution for the production of stirrups and shapes bent in both the clockwise and anticlockwise directions. **DIAMETER RANGE** ∅10 - ∅45 mm I #3 - #14 **KEY FEATURES** * Fully automatic bending cycle with no manual intervention (higher safety, speed, repeatability) * Bending capability up to ±180°, including opposite bends on the same bar * Universal clamps/grippers for automated transfer and secure clamping during bending * Optional automatic loader and bundle management for continuous workflow * Automatic bar alignment & feeding (magnet arms count each bar to avoid loading errors) * Highly modular configurations, including 2M versions with two moving shaping units for maximum productivity
 Technical Specifications

Blade Width (mm):

300

Brand:

MEP

Machine Type:

Shearline,Double bender

Single Wire Size:

45

  • Machine info:

    Used MEP LTM 300 + CS 460 2M, from 2019, very good working condition.  

  • Production year:
    2019

Related by Single Wire Size

Sigma DBM 52
Sigma DBM 52

SIGMA MECHANICAL REBARBENDER (with 4 Pin hole rails): MODEL: DBM 42 – 4P, used, without CE mark

SIGMA
Sigma DBM 52
Sigma DBM 52

SIGMA MECHANICAL REBARBENDER (with 4 Pin hole rails): MODEL: DBM 42 – 4P, NEW, with CE mark

SIGMA
Sigma DBM 52
Sigma DBM 52

SIGMA MECHANICAL REBARBENDER (with 4 Pin hole rails): MODEL: DBM 42 – 4P, NEW, with CE mark

SIGMA
Sigma DBM 52
Sigma DBM 52

SIGMA MECHANICAL REBARBENDER (with 4 Pin hole rails): MODEL: DBM 42 – 4P, NEW, with CE mark

SIGMA
Sigma DBM 52
Sigma DBM 52

SIGMA MECHANICAL REBARBENDER (with 4 Pin hole rails): MODEL: DBM 42 – 4P, used, without CE mark

SIGMA
Sigma DCH 52
Sigma DCH 52

GMT SIGMA DCH 52 hydraulic manual shear, without CE mark

SIGMA
Sigma DCH 52
Sigma DCH 52

GMT SIGMA DCH 52 hydraulic manual shear, without CE mark

SIGMA
Sigma DCH 52
Sigma DCH 52

GMT SIGMA DCH 52 hydraulic manual shear, without CE mark, slow hydraulic

SIGMA

Related by Blade Width (mm)

PEDAX Peddinghaus Simplex RS 300
PEDAX Peddinghaus Simplex RS 300

Fully working RS 300 shear from Pedax/Peddinghaus. It can be integrated to any pedax shear line. Ask...

PEDAX