Welcome

Omni 16 2019115

 Description
Completely automatic plant, electronically controlled, for the production of medium to large sized stirrups, straightened cut to length bars and bent/shaped bars, with bends on one or both ends, up to a length of 12 m. The plant includes a straightening unit, with automatic diameter change and 6 hyperbolic rotors, and two independent mobile bending heads. The special buffer unit for the straightened bars allows both the straightening and bending phases to be carried out at the same time, thus ensuring a high production capability from the plant. Diameters ranging from 6 to 16 mm can be processed. Ability to process two wires simultaneously up to diameter 12 mm.
  • Machine info:

    Machine in a very good working condition, with 5 pay offs, processing wire 8 - 16 mm, from 2007, automatic change of diameters

  •  

    Technical charcteristics (given by the original producer)

     

    Supply volatage

    440 V- 50 Hz

    Installed power

    131 kW

    Operating power

    70 kW

    Compressed air

     

    Consumption (Filtered air, dried, without oil)

    150 l/min

    Operatin pressure

    6 bar

    Straightening and bending

     

    Straightening system

    Hyperbolic rotors

    Rotors motorization

    Electric (brushless motors)

    Diameter change

    Fully automatic

    Max number of independent straightening lines

    6

    Cutting system

    Static and/or flying

    Bars header

    Yes

    Change of bending spindles

    Manual

    Minimum distance between the two bending heads

    700 mm

    Number of pliers

    2 lateral

    Feeding speed

    0,9÷1,5 m/s

    Conditions of the enviroment *

     

    Temperature

    4÷40 °C

    Altitude 

    <1000 m (asl)

    * For optimal operation

     

     

    Production characteristics

     

    Mechanical characteristics of the workable material (smooth and/or ribbed)

    Material type

    FeB44K, FeB32K, FeB38K,

    Max. Yield strength

    600 N/mm²

    Max. Breaking load

    700 N/mm²

    Elongation

    >12%

    Range of diameters

     

    Double wire

    6÷12 mm

    Single wire

    14÷16 mm

    Bending angles

     

    Max. angle clockwise and counterclockwise fold

    180°

    Spindle diameters

     

    Bending mandrel diameters

    40, 60, 96, 160 mm

    Bar production

     

    Min. Length with flying shears

    1000 mm

    Min. Length with static shear

    300 mm

    Max. length

    12000 mm

  • Production year:
    2007
EVG
Filzmoser
GMT
Hambi
KOCH
KRB
MEP
OSCAM
PEDAX
Peddinghaus
SCHLATTER
SCHNELL
SIGMA
TECNO IMPIANTI
VITARI
WAFIOS