Welcome

Standard MESH Machines


GMT is proud to present, 5 highly efficient Electrowelding MESH plants of our own design and production.

***SITE IS STILL UNDER CONSTRUCTION***


GMT mesh machines can be build up in a modular construction system. Everything is build up around the welding unit, the rest are options and can be integrated and added to the main welding head. Options are from;  Manual loading of the longitudinal wire, Pre-loading table with integrated straightening machines "CUTWISE", pre-feeding cart for longitude bars, turner and stacker, up to an off-coil system with 24 horizontal or vertical spools for longitude wire as well as off-coil for cross wire.

The modular construction of the GMT mesh welding machines are ideal for economical production of light and heavy standard meshes. In addition to our standard mesh machines we also have a very flexible engineered mesh machine which also come in a modular system. All mesh plants are  computer controlled and the pitch of the cross wires can be programmed from 50 mm and up. This opens for further possibilities in designing engineered mesh and special meshes. - Want to know about engineered solutions, click here.

Type C 24 C

Type C 24 C

Longitude and cross wire from coil.

C 24 C - are you are looking for high speed mesh welding plant which is productive, and with low maintenance cost - then GMT C 24 C is the machine you are looking for.

With line wires and cross wires from coils + turning and stacking device you are set to go for high capacity. Want to know more? Click here 

For layout - click here 


Type C 24 B

Longitude wire from coil and cross wire from pre-cut bars

C 24 B - is a attractive alternative to C 24 C, if you often change the cross wire. It is build up the same way, only the off-coil feeding of cross wire, has been change with a modul of cross wire magazine with magnetic picking and wire feed. This version also come with turner and stacker as well as a roller evacuation system if required. Want to know more? Click here 

For layout - click here 

Type C 24 B

Type B 24 C

Type B 24 C

 Longitude from bar and cross wire from coil

B 24 C - is an interesting mesh plant for those who want to spend less, and where the space in length is a limitation. The longitude wire is feed from a table where the operator can load the bars into a pre-feed cart which bring the longitude wire automatically to the welding head. Once producing the mesh the operator prepare the next charge. The cross wire is feed automatically from coils, with either one or two integrated straightening machines, which cut the bars into a magazine where the cross wires are feed with magnetic feed. As an option, one or two straightening machines "CUTWISE" can be integrated along the feeding table. Want to know more? Click here 

For layout - click here 


Type B 24 B

Longitude and cross wire from pre-cut bars

B 24 B - is a economical mesh welding machine working from pre-cut bars only.The longitude wire is feed from a table where the operator can load the bars into a pre-feed cart which bring the longitude wire automatically to the welding head. Once producing the mesh the operator prepare the next charge. The cross wire is feed from pre-cut bars, laying in a magazine with magnetic feed. The standard version comes with a run out table and as an option it can be equipped with a turner and stacking unit as well. Its always possible to upgrade the line at a later stage, with a automatic line wire feed from coils with loop and pre-feeding unit. Want to know more? Click here 

For layout - click here 

Type B 24 B

Type B 24 B - M

Type B 24 B - M

Longitude and cross wire from bar manual feeding

B 24 B - M - is a basic mesh machine working from pre-cut bars only. The operator feed the bars direct into the welding head and the mesh is produced. The cross wire is feed from pre-cut bars, laying in a magazine with magnetic feed. The standard version comes with a run out table and as an option it can be equipped with roller conveyors and a turner and stacking unit as well. Its always possible to upgrade the line with a pre-feed cart and/or automatic line wire feed from coils with loop and pre-feeding unit. Want to know more? Click here 

For layout - click here 

EVG
Filzmoser
GMT
Hambi
KOCH
KRB
MEP
OSCAM
PEDAX
Peddinghaus
SCHLATTER
SCHNELL
SIGMA
TECNO IMPIANTI
VITARI
WAFIOS